When an optical fiber is immersed in liquid, a high-temperature, high-speed jet is discharged. Researchers expect this to be applied to medical treatment in the future. Now, a research team from Russia and Japan has explored this phenomenon further and revealed the reasons behind the jet formation.
Lasers using a thin optical fiber and combined with an endoscope and catheter can be easily transported into deep areas of the body or inside blood vessels. Traditionally, affected areas or lesions are removed by generating heat inside the tissue through laser absorption—a process known as the photothermal effect.
Yet, hydrodynamical phenomena, such as microbubble formation or high-speed jet generation from the optical fiber, show immense medical promise.
The process of jet formation happens when the laser is irradiated to the water, causing the water to boil and a vapor bubble to form at the tip of the optical fiber. The vapor bubble grows until the laser energy absorbed in the liquid is consumed. Because of the surrounding cold liquid, condensation suddenly shrinks the vapor bubble.
Using a numerical simulation, Dr. Junosuke Okajima from Tohoku University’s Institute of Fluid Science, along with his colleagues in Russia, set out to clarify the jet formation mechanism. Their simulation investigated the relationship between the bubble deformation and the induced flow field.
When the bubble shrinks, the flow toward the tip of the optical fiber is formed. The flow deforms the bubble into the cylindrical shape. This deformation induces the collision of flow in a radial direction. This collision generates the jet forward. As a result of collision and jet formation, the vortexis formed at the tip of the deformed bubble and it grows larger.
“We found the jet velocity depends on the relationship between the size of the vapor bubble just before the shrinking and the fiber radius,” said Okajima. “We will continue to develop this study and try to find the optimum condition which maximizes the jet velocity and temperature, making further laser surgical techniques more effective and safer.”
Researchers use laser-generated bubbles to create 3-D images in liquid
Roman V. Fursenko et al. Mechanism of high velocity jet formation after a gas bubble collapse near the micro fiber immersed in a liquid, International Journal of Heat and Mass Transfer (2020). DOI: 10.1016/j.ijheatmasstransfer.2020.120420
Revealing the reason behind jet formation at the tip of laser optical fiber (2020, October 12)
retrieved 12 October 2020
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.